• Most suitable for the strength test of plastic composite materials.
• Gage Length : 2, 5mm.
• Applicable linear expansion coefficients :
  1, 3, 6, 9 x10^-6/
• Working Temperature Range :
  -196 to +200

Waterproof Welding Gage 

Welding finish requires no coating. Flange size : 5 x 21mm, thickness = 0.1. Applicable linear expansion coefficients : 11 x10-6/ Working Temperature Range : -20 to +100 Water resistance : 100kgf/cm x cm 1000 hours

Miniature Waterproof Strain Gages 

High-Temperature Foil Strain Gages 

Working temperature range : -196 to +350 (with adhesive PI-32). Gage lengths : 2, 5mm. Patterns : Uniaxial, biaxial (0,90, Triaxial (0,90,45. Applicable linear expansion coefficients : 11, 13, 16 x10-6/

High-Temperature Foil Strain Gages 

Working temperature range : -196 to +250 (with adhesive PC-6 or PI-32). Gage Lengths : 0.2, 0.5, 1, 2, 5mm. Patterns : Uniaxial, Triaxial (0,90,45. Applicable linear expansion coefficients : 11, 16 x10-6/ Reversible gages which ensure improved accuracy of temperature compensation, are available.

Weldable Half-Bridge High-Temperature Gages 

Working Temperature range : 0 to +750 Gage Length : 10mm. Materials used : Inconel 600. Patterns : Uniaxial 2-element. Applicable linear expansion coefficients : 11, 13, 16 x10-6/ With a spot-welded 3-conductor MI cable, 2m long.

Low-Temperature Foil Strain Gages

Usable at low temperatures down to -269 (with adhesive PC-6) or -196 (with adhesive CC-33A or UC-26/27A) Gage lengths : 0.2, 0.5, 1, 2, 5, 30mm. Patterns : Uniaxial, triaxial (0,90,45) Applicable linear expansion coefficients : 5, 11, 16 x10-6/

Ultrahigh-Elongation Foil Strain Gages 

Can measure plastic strains in a range of 10 to 15% , 20% . Gage lengths : 2, 5, 6.5mm Patterns : Uniaxial, biaxial (090), triaxial (0,90,45)

Waterproof Strain Gages 

Usable outdoors or under water (100 hours min under a water pressure of 100kgf/cmxcm. Patterns : Uniaxial, biaxial (0,90, Triaxial (0,90,45) with 2 leadwires each; uniaxial with 3 leadwires. Applicable linear expansion coefficients : 11, 16, 23 x10-6/ . Gage lengths : 2, 5mm.

Strain Gages for Concrete 

Gage lengths : 70, 80, 120 mm. Pattern : Uniaxial. Gage lengths : 10, 20, 30mm suitable for concrete application). Patterns : Uniaxial, biaxial (0,90),triaxial (0,90,45)

Semiconductor Strain Gages

Semiconductor is used for the resistive element, thereby providing several ten times higher sensitivity than that of foil gages. Gage lengths : 1, 2, 3, 4, 6, 7, 9mm. Patterns : Uniaxial, biaxial (0,90) Types with no base sheet available. Other Strain Gages Available